How to Replace Car Door Locks

The car door lock on the driver side door gets used more than the twin on the passenger side. When the lock quits working, it needs to be replaced. Here are the steps to replace car door locks.

Instructions

      Step 1

      Remove the arm rest and any speaker covers. Next remove the door panel, being careful not to break the plastic clips. Use a screwdriver to remove the screws holding the door handle. Use a pair of pliers to pop out the plastic clip, then twist the clip to allow the interior door handle to swing free.

      Step 2

      Disconnect the rod from the lock core, located inside the door. Remove the two bolts holding the door handle assembly, making sure you mark the position of the rod before you open the clip and remove the door handle assembly.

      Step 3

      Install a new lock. Move the clip from the snap ring to release the lock core. Put in another lock core, then move the clip back to the snap ring to hold the new core in place. Put the door handle assembly back in the door and reconnect the rod. Put both bolts back and reconnect the rod to the lock core. Slide the interior door handle back in place and replace the plastic clip. Use a screwdriver to put the door handle back on, and then replace the door panel, speaker cover and the arm rest.





-------------------
With these instructions you don't need to hire someone to replace your door lock you can now do it on your own.

Source